DESKTOP CNC MACHINES – FREE CNC TRAINING (ENGLISH/SPANISH) & FREE USA SHIPPING!

how to turn a $699 MINI MILL INTO A $5000 DESKTOP CNC mill

harbor freight mini mill cnc conversion kit  CNC FUSION

The X2MM CNC KIT... can help Engineers, Small Business Owners, Inventors, Gunsmiths, Machinist, Students, Little Machine Shop Owners… Get into CNC…faster and easier…than they ever thought possible.  Why not find out what the X2MM CNC KIT can do for you at my own risk!


From The Cluttered Desk of Sergio Lares

Wednesday, 2:21 pm

North Bank of the Columbia River 


Dear CNC enthusiast, we need to talk.


Hi, I'm Sergio, an engineer with 16-years of machine design expertise.  If you have been looking to convert your X2 mini mill to CNC... or... if you have been researching for a Desktop CNC milling machine chances are you have heard of me.  (If not, hang with me for just a few seconds here.  And I’ll show you how to turn a $699 X2 mini mill into an almost $5,000 CNC milling machine.)    

 

Sounds too good to be true, doesn’t?  Well, it’s not.  And if you are serious about converting your X2 mini mill into CNC…(because this is only going to work if you are)…then sit back and let me explain what’s going on.


But first, I’m basically a very private guy, and just an introverted geeky engineer. But in order to get this important message out, I’ve been forced to put away all shyness and humility.  So let me just lay it out: 

I engineered the X2MM CNC KIT, a revolutionary CNC conversion kit for X2 mini mills… for guys who cannot afford or do not want to pay $5,000 for a CNC desktop mill.  And unlike the kits you've seen sold (by amateurs that are notorious for binding), this kit is specifically-engineered not to bind… and you gain (not lose) 1.37” of Z-axis travel (but gaining an extra 3.37" of Z-axis travel is also doable)… Plus: the CNC kit is the ONLY of its kind that can boost the column stiffness... and much (much) more. 


***Take Note*** I also offer X2 Mini Mill Desktop CNC machines...everything (and much more) is included.  Plus:  I also offer exclusive CNC training videos to get you into CNC...as fast, as humanly possible.  (Contact me.  It is just the simple, friend).  

WHAT IS THE X2MM CNC KIT?

The X2MM CNC KIT is a newbie-proof mechanical ‘plug-and-play’ kit. This original CNC conversion kit helps X2 mini mill owners save thousands of dollars by retrofitting their own mill… instead of paying $5,000 for a new CNC desktop mill. 


And… the X2MM CNC KIT is the fast-track for X2 mini mill owners to get into the exciting world of CNC. All you need is 3-hrs and do a few alignments. (You can do it this afternoon, in fact). 


But… did you know that a CNC converted X2 mini mill (with the X2MM CNC KIT) can do practically anything that a $5,000 CNC desktop mill can do? 


In brief, the X2MM CNC KIT offers many exclusive features not found in any other kit. But that’s just part of the story… keep reading to find out more.  

WHY THE X2MM CNC KIT IS BETTER

The X2MM CNC KIT is designed by an engineer with over 15 years of machine design expertise, not by an amateur that lacks the experience of sound design.  


Here’s why it matters: Kits designed by amateurs cause binding. Why? Because they’re not engineers – they don’t know the fundamental (but critical) design principles. 


Example, having three bearings on one shaft will cause binding. Why? Because the third bearing will never line-up perfectly. Yes, you could loosen and re-tighten the bearing blocks, but the shaft will bow… which kills bearing life. 


The amateur designed kits appear to do the same as the X2MM CNC KIT.  Don’t be confused. The X2MM CNC KIT is specially-engineered not to cause binding (when it is properly installed). 


Every detail — from the custom-designed Z axis column to the carefully ‘hand-fitted’ ball nuts to the 1.37” extra Z axis travel — is engineered to boost column stiffens (reduce vibration) and to repeat (±.001” or better). It reflects an engineering obsession to exceed expectations. You can’t design an X2MM CNC KIT like this one if you don’t engineer it that way from the start.

  

The result: a carefully engineered X2MM CNC KIT that exceeds expectations that turns a $699 X2 mini mill into an almost $5,000 CNC desktop mill… without the $5,000 price tag 

COLUMN STIFFNESS BOOST!

Why does a stiffer column matter?  Because it reduces machine vibration – which is critical for machining tight tolerance parts, and for superior surface part finish. 


One thing is for sure: the X2MM CNC KIT is designed to boost the column stiffness… and… it’s the only kit that can do this! 


And there’s more: the X2MM CNC KIT has been cleverly designed to keep the Z axis ball screw away from chips and coolant. If chips get into the ball-nut, it will cause binding, down time and costly premature wear.  Plus… this kit eliminates the need for a Z axis chip guard. 

MORE Z-AXIS TRAVEL

The X2MM CNCN KIT is the only kit (as far as I know) that will gain you an extra 1.37” of Z axis travel – other kits rob you 1.37” of Z axis travel!  

  

Here’s why the extra 1.37” matters: The Z axis travel  (X2 mill) ranges from 8” to 11”. So when you swap long drill bits – its guaranteed that the bit will get in the way of the workpiece. Which means you have to move the mill table (loose tool position)… or worse… remove the workpiece (relocate the workpiece and tool position)!   


Here’s the question: Can the machine return to 0,0,0 consistently after an operation?  If you lose your ''0'' position, you have no idea where the mill is – this leads to errors in machine position and re-aligning the workpiece.

image144

PRECISION-MACHINED KIT

The X2MM CNC KIT is precision-machined to assemble without binding, from the bearing blocks to the ball screws – everything is machined to exact specification.  I have taken no shortcuts. 


The X2MM CNC KIT is shipped to you pre-assembled (X Y Z axis) – this convenient time-saver guarantees your kit is shipped to you assembled correctly. 


A well-built X2 CNC mini mill requires precision parts and quality components for utmost performance, else you just have a toy. 

PRECISION GRADE C7 - BALLSCREWS & NUTS

The X2MM CNC KIT uses grade C7 precision rolled ball screws and nuts for a precision (butter-smooth) running fit...on ALL 3-axis. 


for achieving a repeatability of ± .001” (or better). 


Warning:  Too much backlash is considered bad news... cuz it affects machine stiffness, plus... it is also hard on cutting tool life, repeatability, and machines parts.


Look: you can bet on machined circles and diagonal cuts to be out of spec if you have too much ball screw backlash.  Why?  Software (like Mach3) although it can compensates for backlash.... just cannot compensate (that well) for too much backlash errors.  

HELICAL COUPLINGS (ZERO BACKLASH COUPLING)

Designers who use rigid (one-piece) couplers on small CNC machines – either lack design experience, or they want the cheapest route (or both). But this setup murders the stepper motors and bearing life. 


Instead, the X2MM CNC KIT uses helical couplings for zero backlash (no play) – which are superior in handling parallel, axial, and angular misalignment. 


And unlike other shaft couplers, these helical couplings handle more holding torque versus set screw couplings… without marring the shaft. 

image145

NO CHIPS ON HELICAL COUPLINGS

Using 4X spacers are a common (cheap) setup to hold stepper motors.  But aligning the motor to the screw is awkward and slow.... plus it also packs the coupling with unwanted chips.  


And worse: this method is much stiffer than using a square-type motor holders.  Remember: stiffness is key... especially when IF your motors are running at higher speeds, which can cause resonance frequencies.  


As a result — the X2MM CNC KIT offers a much better solution versus using 4X post to hold the motor. By using square motor mounts (which yields elegant sleek lines) the main function is to offer superior (and much stiffer) motor mounts.  Plus: it also keeps hot oily chips away from the shaft couplers. 


Warning:  The 4X post approach is notorious for clogging the setscrews of shaft the couplers, which is NOT desired. 

STIFF BEARINGS

Bearings are one of most critical components. Per ASTM’s rolling element standards, “installation and mounting errors accounts for 27% of all failures and 43% accounts for lack of lubrication”. Bearings that fit too tight (or too loose) on a shaft will cause premature bearing wear and wobbly looking finished parts. 


The X2MM CNC KIT replaces the stock thrust bearings with robust double row angular contact bearings on all pillow blocks. This beefy setup yields high radial and high thrust rigidity, and unlike the stock un-sealed thrust bearings, the angular contact bearings are sealed to keep chips away – and to keep the bearings greased. 


Unlike the stock open thrust bearings of the X2 mini mill, there’s a high chance for chips to enter the bearings, and for grease to ooze out. (Remember: 43% of bearing failure accounts for no lube!).

HOW TO SAVE $100/HR

It doesn’t matter if you’re cutting aluminum, steel, plastic – to make robots, guns, R/C, molds or jewelry. You need CNC.  And a CNC converted X2 mini mill (with the X2MM CNC KIT) is a capable and indispensable investment.


A typical CNC shop rate is $100/hour. And you will never have to pay CNC shops $100/hr or wait on machine shops ever again! 


The X2MM CNCN KIT is a small investment that is guaranteed to pay for itself in just a couple of hours. (What’s wrong with starting your side hustle on eBay to sell your CNC creations?) 

RIGOROUS QA INSPECTION

The X2MM CNC KIT is hand-assembled from the ground up. Every screw is torqued down to just the right level before it is finished, then tested, and then it must pass a rigorous 14-point QA (Quality Assurance) inspection – no exception. 


The $6,018,084 Dead Man Lesson:  My past employer lost a $6,018,084 lawsuit because of a quality defect (that supposedly) led to a man’s death.  That was the BAD news.


But good news came by way of my QA/WI documents.  In fact, they received high praise by the corporate lawyers (et al.) that handled the lawsuit.  Why?  The lawyers claimed pictorial documents were easy-to-follow... so much, that they (lawyers) felt as if they could effortless setup the machines, too.   


Here's why I bring it up:


An X2 CNC mini mill may not cause you to lose your life.  But the lesson here is that – details do matter – in fact, they matter a whole lot!  


Listen:  inspecting parts is not fun stuff, but I've learned that being meticulous can lead to life or death... whether it be a human life, or a CNC machine. 

LIVE-SUPPORT (SE HABLA ESPAÑOL)

If you have any questions after (or before) you have installed the X2MM CNC KIT you can contact me by email or by phone.


After all… I’m the only CNC guy on the market that offers ‘live-tech support’… in English and Spanish… either way, I got your back!


As a small favor, I only ask you send me photos, testimonials or let me know what’s up (to brag… or… to complain) about how the X2MM CNC KIT is working for yah!

image146

NO SPECIAL INSTALLATION REQUIRED

Did you know that you can turn your X2 mini mill into a CNC desktop mill with only a few screws? 


There’s no guesswork installing the X2MM CNC KIT – it’s fast and easy – you don’t need special tools, you don’t need to grind, and you only have to pre-tap two holes – and you’ll need hex wrenches. (optional: crack open a cold one). 


Just tap two extra holes... if you want to boost the column stiffness, and then just make a few alignment checks. (You’ll get easy-to-follow alignment techniques… plus I offer ‘live-support’ to help you along the way).

THREE X2MM CNC KIT OPTIONS

The X2MM CNC KIT is offered in 3 great choices: BAREBONE and STRONGBACK and ELITE:


$847:  BAREBONE is a superior choice versus the CNC kits that are designed by amateurs, which are notorious for binding. 


$997:  STRONGBACK is an upgrade to the BAREBONE – and the innovative Z axis upgrade is specifically-engineered to reduce machine vibration, which can cause dangerous resonant frequencies.... Plus: this is the ONLY kit that can boost the column stiffness!


$1,850:  ELITE is mechanically identical to the STRONGBACK... but its the easiest and fastest way to CNC convert your X2 mini mill so that you can start making precision parts this afternoon. It comes with everything you need, including: 

  • CNC BRAINS -  Plug & Play CNC electronics in a nice compact package to help you get into CNC—fast. This CNC electrical solution is designed to save you time—and it takes only a few minutes to setup. The CNC Brain Box is a fast-track solution that will save you hours of frustration. No need to worry about bad wiring, picking electronics, and on and on).  
  • Speeds & Feeds Software


$4,000:  TURNKEY CNC - READY TO RUN 

  • CNC BRAINS -  Plug & Play CNC electronics in a nice compact package to help you get into CNC—fast. This CNC electrical solution is designed to save you time—and it takes only a few minutes to setup. The CNC Brain Box is a fast-track solution that will save you hours of frustration. No need to worry about bad wiring, picking electronics, and on and on).  
  • Speeds & Feeds Software
  • CNC Software - Mach3
  • X2 MINI MILL MACHINE
  • And a lot more... 


(REMEMBER: FREE GROUND SHIPPING  - USA ONLY)

I dare say this X2MM CNC KIT is the best CNC conversion kit in the history of the X2 mini mill. That’s a bold statement, I know, but check out this 105% Money Back Guarantee.


The X2MM CNC KIT has generated me a wave of confidence. So much that I am going to offer you a 105% money back guarantee. 


I’ve seen how well the X2MM CNC KIT has worked for me.  And it will work for you if you try it. Now I want to remove any risk you may have by thinking that this kit may sound too good to be true. 


Simply try the X2MM CNC KIT and follow the easy-to-follow assembly instructions. You must be thrilled with the X2MM CNC KIT. Otherwise, return the kit as directed and you’ll receive 100% of your money back plus an extra 5%. 

FREE SHIPPING!

I have a very special bonus for you! I’m gonna ship to you the X2MM CNC KIT… FREE (USA only)… but I’m not sure how long I’ll keep this generous offer available, so don’t let it drag on!


Time, of course, is tight. If what you’ve read today has got you very excited about turning your $699 X2 mini mill into an almost $5,000 CNC desktop mill, then give this X2MM CNC KIT an honest try, today. 


Remember: this newbie-proof X2MM CNC KIT is fast and easy to install, and it will start working for you… this afternoon.  (Plus… don’t forget I offer ‘live-support’, too!). 


This is an honest deal from an honesty guy… and… more generous than it needs to be. 

HOW TO GET AN X2MM CNC KIT

To order your no-risk, better-deal-than-anyone-else moneyback guarantee, just click the “Buy Now” button below.


And that’s it. Your made-to-order X2MM CNC KIT will be rushed out to you in 3 weeks, or sooner. 


After that, you are the judge. If, after 45 days, for some strange reason you’re not 100% satisfied simply return the kit and you’ll receive a fast refund of every penny you paid. It is just that simple, friend. 


This is important – understand the X2MM CNC KIT is ‘Made-to-Order’… it ‘Cannot Be Canceled’. (So if you’re not serious, please don’t order it.) 

GET THE X2MM CNC KIT

At the beginning, I addressed you as “Dear X2 mini mill user”.


Today I summon you to something far greater. More noble, more expansive, more ambitious than merely being an “X2 mini mill user”. 


I’m inviting you to join an elite group of CNC individuals who stand head and shoulders above the masses of ordinary X2 mini mill users.  


thanks,

Sergio Lares 

Mechanical Engineer 


PS:  Word of the X2MM CNC KIT is spreading like wildfire among X2 mini mill owners (Small Business Owners, Engineers, Machinist, Hobbyist, Students, Little Machine Shops, Inventors, Gunsmiths)… but the X2MM CNC KIT is made-to-order (there isn’t another CNC kit like it in the world), I do not keep a large supply of these kits on hand – it’s just too darn expensive for me to do that.  And sometimes I get so flooded with unexpected orders that I can fall behind a bit.  


Heads Up! – If I get request for turnkey “X2 CNC mini mills”… that'll limit (even more) the supply of X2MM CNC KITS… so the wait can extend 6-8 weeks. So I urge you to order now and avoid any wait you might have if I’m forced to run a new batch to fill orders.  


PSS: Remember… you can reach me with questions, comments, testimonials (always looking for testimonials), offers and ideas HERE